Browsing all articles tagged with 200mm

DYNAVISTA Full Motion TV Wall Mount Bracket with Tilting Swivel Arm for 10 to 40 inch Flat Screens TV and Monitors with Max Weight 44 lbs & VESA Mount up to 200mm x 200mm

This DYNAVISTA TV Wall Mount is a full motion,low profile, high-quality tilting TV wall mount crafted from heavy duty genuine steel. It supports monitors/screens 10 to 40 inches in size, weighing up to 44 lbs, and is compatible with VESA up to 200mm x 200mm.The mount keeps 2.3-8.9 inches from the wall for a low profile. The package includes the mount, manual and all necessary installation hardware.


Features and Specification:

  • Compatible with 10-inch to 40-inch Sony, Samsung, Panasonic, Vizio, Toshiba, Philips, LG, SHARP AQUOS, RCA and other popular brands
  • Mounting Pattern (VESA): 75x75mm,100×100 mm, 200×100 mm, 200×200 mm
  • Made of premium high quality and heavy duty steel
  • CableManagement : A cable management hook is attached to keep messy cords in place.
  • Maximum Load Capacity: 20 kg (44 lbs.)
  • Low Profile: 3”-8.9”from the wall (5.8cm-22.6cm)
  • Adjustable tilting Bracket 5° up and 15° down
  • Swivel:up to 180°
  • Package includes: TV wall mount and all hardware for both concrete and wooden wallsand instructions booklet
  • Color: black




Note: 2 people may be required for installation. Please make sure your TV screen fits the VESA above before purchasing. We are online for you 24/7, do not hesitate to contact us regarding any issue related to this product.

Product Features

  • COMPATIBILITY: Our TV wall mount supports most flat screens and monitors ranging between 10-inch to 40-inch and VESA mounting holes measuring 75x75mm,100×100 mm, 200×100 mm, 200×200 mm
  • High Grade Material: Crafted from premium quality and heavy duty steel to provide a reliable TV mount with maximum strength and support. Max Load: 44 lbs (20 kg)
  • Full Motion Adjustable Mount: Our TV wall mount features an extendable and articulating arm with an adjustable tilting bracket 5° up and 15° down and a 90° left or right swivel to help you achieve a comfortable view. The mount provides a 8.9-inch extension and collapses to 2.3-inch from the wall for a low profile.
  • Cable Management and Easy to Install: Pre-assembled, this TV wall mount can be set up in a few steps. Perfect for drywall, concrete and wooden walls. A Cable Organizer Hook is included to keep messy cords in place.
  • Package includes: A pre-assembled no-stud TV mount and all necessary hardware and instructions booklet. Note – two people may be required for installation. Compatible with Sony, Samsung, Panasonic, Vizio, Toshiba, Philips, LG, SHARP AQUOS, RCA and other popular brands.

Visit the website for more information…


Aeromount Tilt LCD-252 TV Wall Mount, Max VESA 200mm x 200mm, TV Bracket – Adjustable Telescoping and Rotating Flat Screen TV for Most 17inch – 37inch LED, LCD, OLED, Plasma Flat Screen Televisions

Package Included: TV Mount, Matching Screws, Instructions

Purchase Orientation:
1. Product Size, Weight and Load-Bearing:
LCD-252 TV bracket size is 15in x 9in x 9in
net weight is about 4 pounds
display weight should be less than 66 pounds

2. Installation Hole Spacing:
Suitable for 4in x4 in / 8in x 8in
according to VESA standard.(check VESA and weight before installation)

3. Fit for 17 – 37 inch TV:
Check the back of the TV for four mounting holes (VESA hole mounting)
and check whether the VESA and stud spacing can block the input.
(i.e., the extension, insertion, and pull-out of the power cord)

4. Excellent Material:
The full motion TV mount is made of high grade cold-rolled steel.
It is strong, durable and wear-resistant, and will not easily damage the coating.

5. Operation Tools:
Electric drill, drill bit, ruler, pencil, screwdriver, horizontal ruler.

1. Before installing, please check the TV mounting connector (VESA) on the back
of the TV, the weight of the TV and the position of the wall stud to determine
whether the TV wall bracket is suitable for your TV and wall position.

2. Please note in particular that the provided wall anchors are suitable
only for concrete and brick walls.

3. The wall mount may not be mounted above locations where persons might linger.

4. Once you have mounted the bracket and the flat panel display
check that they are sufficiently secure and safe to use. You should
repeat this check at regular intervals (at least every three months).

5. Do not place loads on the articulating wall mount that are heavier than
the load bearing capacity specified and do not exceed the specified maximum size.

After purchase, please read the instructions carefully.

Product Features

  • [COMPATIBILITY AND FIRMNESS]: Our wall mount TV brackets are suitable for most 17inch – 37inch televisions with a maximum load-bearing capacity of 30KG, maximum VESA (mounting hole spacing) of 200mm x 200mm. There are made of high quality cold-rolled steel material, and offers strong durability.
  • [OPTIMAL ANGLE OF VIEW]: the LCD-252 wall mount can be rotated by 180° between the rod and panel, 360° between the rod and bar, and -5° to +10° at the tilt angle to reduce glare and enhance the home television viewing experience.
  • [SPACE-SAVING] This fully dynamic flat screen TV wall mount can be adjusted and stretched to a maximum of 15.3 inches which saves you some valuable space and makes your house look neat and spacious.
  • [EASY TO INSTALL]: With detailed installation instructions, a complete set of mounting screws can be put into place in one step. The anchors we provide apply only to concrete and brick walls.
  • [STABILITY AND SAFETY]: Machine welding technology makes the whole TV mount articulating unit strong and safe. Easy adjustment of inclination by tool-free spring handle.

Visit the website for more information…


Mounting Dream MD2268-S TV Wall Mount Tilting Bracket for Most 26-42 Inch LED, LCD and Plasma TVs up to VESA 200 x 200mm and 44 LBS Loading Capacity, 6 FT HDMI Cable and Bubble Level

Fits 26-42″ TVs

This mount fits most of 26-42″ TVs sold today. It fits TVs with mounting holes as close as 3″x3″ or as wide as 8″x8″ (in TV terms – VESA 75x75mm to 200x200mm).

Low 1.3″ profile

Flush-Tilt design is only 1.3″ from wall yet still tilts to improve viewing and reduce glare.

Heavy duty steel construction

This mount is constructed with heavy duty steel materials and with durable powder coated finish, high grade cold rolled steel makes this mount sturdy and strong. Supports TV weight up to 44 lbs.

Fits 8″ studs plus concrete wall

This mount fits for 8″ studs plus concrete wall typical in US homes. NOT for dry wall installation.

Magnetic bubble level makes leveling work easy and convenient

This level can be easily stuck to the wall plate and free your hands for other mounting work, making leveling work easy and convenient.

6′ high speed HDMI cable

6′ HDMI cable supports 3D, Ethernet, 1440P and Audio Return conforming to latest HDMI 1.4 Standard.

Includes all necessary mounting hardware

This mount ships with hardware for both wall and TV mounting. Anchor included is ONLY for concrete wall installation NOT for dry wall installation!

RoHS certified

This product is RoHS certified, RoHS is the European Union directive standard of Restriction of Hazardous Substance, aiming to protect human health and environment.

Product Features

  • Fits for most of 26-42″ LCD/LED/Plasma TVs up to weight of 44 lbs and up to VESA(mounting hole pattern) 200x200mm (Fits for VESA 75X75mm, 100X100mm, 200X100mm, 200X150mm, 200X200mm).Please check VESA (mounting hole patern), stud spacing, possible blocked cable/input and TV weight prior to making purchase decision to determine whether this TV wall mount fits your TV and the installation application.
  • Flush tilt design for better views and glare reducing, 0-8 degree forward tilt.
  • Fits for concrete wall/ single stud mounting or 8″ wood studs, NOT for dry wall installation. 1.3″ Low profile tilting makes TV close to wall, finish of the mount and all hardware is RoHS (Restriction of Hazardous Substance) certified.
  • All hardware, 6′ HDMI cable, bubble level included(6′ HDMI cable supports 3D, Ethernet, 1440P and Audio Return conforming to latest HDMI 1.4 Standard).
  • Only 3 parts (1 wall plate + 2 brackets) construction easy for assembly and installation.

Visit the website for more information…